Search found 74 matches

by ZebH
Mon Jun 10, 2019 11:18 am
Forum: Our Main Discussion Forum
Topic: What Would be the Best Accelerometer for Detecting an Impact / Crash
Replies: 3
Views: 24

Re: What Would be the Best Accelerometer for Detecting an Impact / Crash

Hi, Thank you for all your help! The accelerometer would be measuring the amount of impact that your head has in a low speed crashes (under 60km). It would be used in a similar way to this! https://www.brightsparks.org.nz/competition/past-competitions/2017-awards/concussion-conundrum/ Thanks very mu...
by ZebH
Thu Jun 06, 2019 2:16 pm
Forum: Our Main Discussion Forum
Topic: What Would be the Best Accelerometer for Detecting an Impact / Crash
Replies: 3
Views: 24

What Would be the Best Accelerometer for Detecting an Impact / Crash

Hi everyone!

Just wondering what you think would be the best accelerometer for detecting an impact/crash?
(I will be using it with an Arduino Nano.)

Thanks very much!
by ZebH
Fri May 31, 2019 5:25 pm
Forum: Our Main Discussion Forum
Topic: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds
Replies: 10
Views: 24

Re: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds

-- The Code Last File :) **loraModem.h File** // Frequencies // Set center frequency. If in doubt, choose the first one, comment all others // Each "real" gateway should support the first 3 frequencies according to LoRaWAN spec. #if BAND == 868 int freqs[] = { 868100000, // Channel 0, 868.1 MHz prim...
by ZebH
Fri May 31, 2019 5:24 pm
Forum: Our Main Discussion Forum
Topic: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds
Replies: 10
Views: 24

Re: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds

--The Code **config.h File:** #define VERSION "0.8.2" // This value of DEBUG determines whether some parts of code get compiled. // Also this is the initial value of debug parameter. // The value can be changed using the admin webserver // For operational use, set initial DEBUG vaulue 0 #define DEBU...
by ZebH
Fri May 31, 2019 5:23 pm
Forum: Our Main Discussion Forum
Topic: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds
Replies: 10
Views: 24

Re: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds

-- The Code **_wwwServer File:** static void printIP(IPAddress ipa, const char sep, String& response) { response+=(IPAddress)ipa[0]; response+=sep; response+=(IPAddress)ipa[1]; response+=sep; response+=(IPAddress)ipa[2]; response+=sep; response+=(IPAddress)ipa[3]; } #if A_SERVER==1 // ==============...
by ZebH
Fri May 31, 2019 5:22 pm
Forum: Our Main Discussion Forum
Topic: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds
Replies: 10
Views: 24

Re: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds

-- The Code **_sensor File:** #if GATEWAYNODE==1 unsigned char DevAddr[4] = _DEVADDR ; // see config.h // ---------------------------------------------------------------------------- // XXX Experimental Read Internal Sensors // // You can monitor some settings of the RFM95/sx1276 chip. For example t...
by ZebH
Fri May 31, 2019 5:22 pm
Forum: Our Main Discussion Forum
Topic: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds
Replies: 10
Views: 24

Re: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds

-- The Code **_otaServer File:** #if A_OTA==1 //extern ArduinoOTAClass ArduinoOTA; // Make sure that webserver is running before continuing // ---------------------------------------------------------------------------- // setupOta // Function to run in the setup() function to initialise the update ...
by ZebH
Fri May 31, 2019 5:21 pm
Forum: Our Main Discussion Forum
Topic: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds
Replies: 10
Views: 24

Re: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds

-- The Code **_loraModem File:** void printState(uint8_t i) { uint8_t intr = flags & ( ~ mask ); // Only react on non masked interrupts if (i>= debug) { Serial.print(F(" state=")); Serial.print(_state); Serial.print(F(", sf=")); Serial.print(sf); Serial.print(F(", rssi=")); Serial.print(_rssi); Seri...
by ZebH
Fri May 31, 2019 5:20 pm
Forum: Our Main Discussion Forum
Topic: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds
Replies: 10
Views: 24

Re: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds

-- The Code **_loraFiles File:** String espDir(String s) { return s; } // ---------------------------------------------------------------------------- // Read the gateway configuration file // ---------------------------------------------------------------------------- int readConfig(const char *fn,...
by ZebH
Fri May 31, 2019 5:20 pm
Forum: Our Main Discussion Forum
Topic: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds
Replies: 10
Views: 24

Re: Connecting LoRaGo DOCK to Wifi network - Keeps disconnecting and reconnecting every 2-3 seconds

-- The Code **_gatewayMgt File:** #if GATEWAYMGT==1 #if !defined _THINGPORT #error "The management functions only work over _THINGPORT and not over _TTNPORT" #endif // ---------------------------------------------------------------------------- // Ths function gateway_mgt is called in the UDP Receiv...