Dead stock clearance

brunoaudio
Posts: 13
Joined: Wed Aug 29, 2018 10:37 am

Re: Dead stock clearance

Post by brunoaudio » Fri Nov 23, 2018 2:49 pm

My address is
...
..
.
Thanks,
Bruno Willmott-Dalton

ZebH
Posts: 47
Joined: Thu May 12, 2016 4:50 pm

Re: Dead stock clearance

Post by ZebH » Sun Dec 02, 2018 7:24 am

Hi Mr. Liam,

If possible could I please have a Picaxe Programing Lead? (I have broken my original one!)

My address is:
...
..
.

Thanks very much!!!
~ Zeb

Liam
Posts: 113
Joined: Tue Apr 03, 2018 11:43 am
Location: Christchurch
Contact:

Re: Dead stock clearance

Post by Liam » Fri Dec 07, 2018 10:08 am

ZebH wrote:
Sun Dec 02, 2018 7:24 am
Hi Mr. Liam,

If possible could I please have a Picaxe Programing Lead? (I have broken my original one!)

My address is:
...
..
.

Thanks very much!!!
On its way Zeb!! Enjoy :)
Liam Beale
(Moderator)
www.phoenix-tech.co.nz

Liam
Posts: 113
Joined: Tue Apr 03, 2018 11:43 am
Location: Christchurch
Contact:

Re: Dead stock clearance

Post by Liam » Fri Dec 07, 2018 10:08 am

brunoaudio wrote:
Fri Nov 23, 2018 2:49 pm
My address is
...
..
.
Thanks,
Bruno Willmott-Dalton
Bits and pieces on their way :)
Enjoy!
Liam Beale
(Moderator)
www.phoenix-tech.co.nz

brunoaudio
Posts: 13
Joined: Wed Aug 29, 2018 10:37 am

Re: Dead stock clearance

Post by brunoaudio » Sat Dec 08, 2018 9:59 pm

Liam wrote:
Fri Dec 07, 2018 10:08 am
brunoaudio wrote:
Fri Nov 23, 2018 2:49 pm
My address is
...
..
.
Thanks,
Bruno Willmott-Dalton
Bits and pieces on their way :)
Enjoy!
Thanks So Much Liam.

Cheers,
Bruno

brunoaudio
Posts: 13
Joined: Wed Aug 29, 2018 10:37 am

Re: Dead stock clearance

Post by brunoaudio » Sat Dec 08, 2018 10:16 pm

Also Liam if you don't mind could you please send me some kiwipatch boards that I need for my synth project and the tubes of random ic's so I can make up projects based around the different ics to practice my soldering skills.


Thanks,

Bruno

ZebH
Posts: 47
Joined: Thu May 12, 2016 4:50 pm

Re: Dead stock clearance

Post by ZebH » Wed Dec 12, 2018 8:05 am

Hi Mr. Liam,

The programming lead has arrived! Thanks very much! :D
~ Zeb

Post Reply