Dead stock clearance

Liam
Posts: 123
Joined: Tue Apr 03, 2018 11:43 am
Location: Christchurch
Contact:

Dead stock clearance

Post by Liam » Tue Nov 06, 2018 10:07 am

I have heaps of bits and bobs I need to clear....

If you want to have some random junk then post a message with your address and I can get some bits in the post to you :)

Liam
Liam Beale
(Moderator)
www.phoenix-tech.co.nz

Liam
Posts: 123
Joined: Tue Apr 03, 2018 11:43 am
Location: Christchurch
Contact:

Re: Dead stock clearance

Post by Liam » Wed Nov 07, 2018 3:07 pm

ImageIMG_1847 by Liam Beale, on Flickr
ImageIMG_1848 by Liam Beale, on Flickr
ImageIMG_1849 by Liam Beale, on Flickr
ImageIMG_1850 by Liam Beale, on Flickr
ImageIMG_1851 by Liam Beale, on Flickr
ImageIMG_1852 by Liam Beale, on Flickr
ImageIMG_1853 by Liam Beale, on Flickr
ImageIMG_1854 by Liam Beale, on Flickr
ImageIMG_1855 by Liam Beale, on Flickr
ImageIMG_1856 by Liam Beale, on Flickr
Liam Beale
(Moderator)
www.phoenix-tech.co.nz

Liam
Posts: 123
Joined: Tue Apr 03, 2018 11:43 am
Location: Christchurch
Contact:

Re: Dead stock clearance

Post by Liam » Wed Nov 07, 2018 3:09 pm

Plenty of motors,
a water pump
150mm EDF and ESC
E-Trex GPS and cables
breadboards
cables
resistors
LEDs
switches
Random IC;s
Kiwipatch boards
BB tank turret
Dead arduino boards, good for practicing your surface mount soldering skills
Flyback transformer out of an old CRT monitor
a lynxmotion biped frame
12v fan with the cable cut off it
bits...
bobs...
and heaps more...
Liam Beale
(Moderator)
www.phoenix-tech.co.nz

ZebH
Posts: 70
Joined: Thu May 12, 2016 4:50 pm

Re: Dead stock clearance

Post by ZebH » Fri Nov 09, 2018 10:18 am

Hi Mr. Liam,

Could I please have one?

My address is:
...

Thanks very much!!!

P.S. It was great meeting you at the ASB competition!
~ Zeb

Works3000
Posts: 3
Joined: Fri Nov 02, 2018 10:05 pm

Re: Dead stock clearance

Post by Works3000 » Sat Nov 10, 2018 7:12 pm

Hi My teacher referred me to you on my quest to find a working download cable for a Picaxe Micro controller
thanks
Ash

Liam
Posts: 123
Joined: Tue Apr 03, 2018 11:43 am
Location: Christchurch
Contact:

Re: Dead stock clearance

Post by Liam » Tue Nov 13, 2018 8:08 am

Works3000 wrote:
Sat Nov 10, 2018 7:12 pm
Hi My teacher referred me to you on my quest to find a working download cable for a Picaxe Micro controller
thanks
Ash
Hi Ash!
Yes I have a great cable for use with PICAXE :) Were you just after the one?

Liam
Liam Beale
(Moderator)
www.phoenix-tech.co.nz

Works3000
Posts: 3
Joined: Fri Nov 02, 2018 10:05 pm

Re: Dead stock clearance

Post by Works3000 » Fri Nov 16, 2018 1:09 pm

Liam wrote:
Tue Nov 13, 2018 8:08 am
Hi Ash!
Yes I have a great cable for use with PICAXE :) Were you just after the one?

Liam
HI Liam
Yes as it will be just me using the PICAXEs I have

Ash

Arnie123
Posts: 2
Joined: Sat May 13, 2017 4:50 pm

Re: Dead stock clearance

Post by Arnie123 » Sat Nov 17, 2018 9:07 pm

can i get some.
...
..
.
thanks.

Liam
Posts: 123
Joined: Tue Apr 03, 2018 11:43 am
Location: Christchurch
Contact:

Re: Dead stock clearance

Post by Liam » Mon Nov 19, 2018 8:36 am

Arnie123 wrote:
Sat Nov 17, 2018 9:07 pm
can i get some.
...
..
.
thanks.
On its way Arnie!
Liam Beale
(Moderator)
www.phoenix-tech.co.nz

Liam
Posts: 123
Joined: Tue Apr 03, 2018 11:43 am
Location: Christchurch
Contact:

Re: Dead stock clearance

Post by Liam » Mon Nov 19, 2018 8:38 am

Works3000 wrote:
Fri Nov 16, 2018 1:09 pm

HI Liam
Yes as it will be just me using the PICAXEs I have

Ash
Send me your address and I will get a cable in the post for you - along with a junk pack!

Liam :)
Liam Beale
(Moderator)
www.phoenix-tech.co.nz

Post Reply